| |
IW2OHX > BBS 31.10.90 14:05z 78 Lines 3002 Bytes #-12969 (0) @ WW
BID : 149_IW2OHX
Subj: IW2OHX gateway: URONode retired, WAMPES connector
Path: SR1BSZ<EA2RCF<LU9DCE<VE3CGR<WG0A<N2MH4<N3HYM<IW2OHX
Sent: 261031/1359Z 149@IW2OHX.ILOM.ITA.EU BPQ6.0.25
IW2OHX packet gateway (Bollate, JN45NN) - new configuration
===========================================================
On 31 October 2026 the AX.25 gateway iw2ohx-gw (Raspberry Pi 4,
Linux) was rebuilt in two steps.
1) URONode retired - LinBPQ IW2OHX-13 is the node
-------------------------------------------------
URONode is gone, and with it the callsigns IW2OHX-7, IW2OHX-3 (flexnetd)
and OHXGW:IW2OHX-1 (kernel NET/ROM). Please update your routes and
scripts: the node on the gateway is now
IW2OHX-13 alias BPQBOL (LinBPQ 6.0.26 + FlexNet, linbpq-flexnet)
It speaks AX.25, NET/ROM and FlexNet. The old URONode services are
commands at the BPQBOL prompt:
DX DXSpider cluster IQ2LB-6
CONV convers (DB0FHN-12 via IGATE)
IGATE the IGATE FlexNet interconnect
CHAT BPQ chat BBS BPQMail XNET (X)Net IW2OHX-14
SHELL Linux shell on the gateway (sysop-made accounts only)
2) No more kernel AX.25 - WAMPES is the connector
-------------------------------------------------
The Linux kernel drops its AX.25 stack in 7.1. The gateway does not
use it any more. WAMPES (DL9SAU's unix-ax25-stack) runs as IW2OHX-2
in userspace. It is a connector, not a node: LinBPQ does all the
routing, and WAMPES only hands AX.25 sessions to Linux programs (ax25d,
DXSpider, the shell login) through userspace libax25. It talks AXUDP to
IW2OHX-13 on loopback and to IW2OHX-12 on the LAN, and has its own IP
addresses: 44.134.24.8 (44Net) and 44.144.128.135 (HAMNET).
Write-up with sample configs: https://www.iw2ohx.net/wampes-gateway.html
How to reach the services
-------------------------
RF (VHF/UHF), via IW2OHX-12 BOLFLX:
144.825 MHz AFSK 1200 Bd / 433.725 MHz G3RUH 9600 Bd
C IW2OHX-12, then C IW2OHX-13 (or C IQ2LB-6 for the cluster)
FlexNet:
C IW2OHX-13 node C IQ2LB-6 DXSpider
via IW2OHX-14 (X)Net DLC7 BOLNET, our FlexNet hub
NET/ROM:
C BPQBOL (IW2OHX-13) - also BOLNET:IW2OHX-14, BOLHF:IW2OHX-15
44Net (AMPRNet):
telnet iw2ohx.ampr.org 23 telnet gate (see below)
telnet iw2ohx.ampr.org 7300 DXSpider, callsign login
HAMNET:
telnet pr.iw2ohx.hamnet.radio 23 telnet gate
telnet dx.iw2ohx.hamnet.radio 7300 DXSpider
Internet:
SSH gateway (key-only, by request): menu DXSpider / IW2OHX-13
New: telnet gate on port 23 (44Net and HAMNET only)
---------------------------------------------------
Log in with your callsign (SSID allowed) and your password. The gateway
then connects you to IW2OHX-13 as AX.25 from YOUR callsign, through
WAMPES. You are at the BPQBOL prompt as if you had come in by radio.
Accounts are given on request (send a personal message to IW2OHX).
Sources outside 44Net/HAMNET are dropped. Five wrong passwords lock the
account for 15 minutes. The password crosses the network in clear:
use the SSH gateway if you have it.
Problems, routes that do not work any more, or a request for an
account: personal message to IW2OHX @ IW2OHX.
73 de Marco, IW2OHX
Read previous mail | Read next mail
| |