| |
PA2SNK > MOTO 10.12.24 22:15z 29 Lines 858 Bytes #49 (0) @ WW
BID : 5935-PA2SNK
Read: GUEST
Subj: GM950
Path: SR1BSZ<IW0QNL<IZ3LSV<DB0ERF<DK0WUE<DK0WUE<VK5RSV<PI8ZTM<PI8LAP<PD0LPM
Sent: 241210/2214Z @:PD0LPM.#FRL.NLD.EURO #:33883 [Joure] $:5935-PA2SNK
From: PA2SNK@PD0LPM.#FRL.NLD.EURO
To : MOTO@WW
ÍÍ[Message No. 435 Send on 10-12-2024 at 23:03:22 Lt by PA2SNK Danny]ÍÍÍÍÍÍÍÍ
Tsthost MsgFilter v1.06c-OlnSoft
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶToplogo creator (c) 1997-1998 by PD0OLNºÄÄÄÄÄÄ
Hi All.
Strugling here to get a conection with my Motorola GM950 VHF.
Its receiving fine and i can make ptt but no tx audio on the back 16pin
acc.
So i think the tx audio on the back has been set to off in the control
software.
Ok got the software but i'm trying to make an usb-ttl to gm950 cable to the
front mic bus.
I cannot find the right schematic for it.
Someone has the schematic for me ?
A url is also welcome !
Danny PA2SNK
73 de Danny PA2SNK
ÍÍ[Pc:Desktop Tnc:Tiny2 mk-2 Trx:Alinco dr135 Ant:Comet GP-98]ÍÍÍÍÍÍÍÍÍ
ÍÍ[PA2SNK@PD0LPM.#FRL.NLD.EURO Sneek,Friesland JO23TA Holland]ÍÍÍÍÍÍÍÍÍ
/ACK
Read previous mail | Read next mail
| |