| |
RN1M > SYSOP 07.07.24 11:29z 23 Lines 963 Bytes #13 (0) @ WW
BID : 5119_RN1M
Read: GUEST
Subj: About RN1M BBS's RF ports
Path: SR1BSZ<IW0QNL<IZ3LSV<DB0ERF<DK0WUE<DK0WUE<VK5RSV<VK2RZ<VE3CGR<PA8F<
PI8LAP<RN1M
Sent: 240707/1106Z 5119@RN1M.SPB.RUS.EU LinBPQ6.0.24
Hello OMs!
In the last time I have heavy noise on HF band in my QTH (QRM from electronic devise my neighbours)
Because my HF port on 20 meters (Net105) and 40 meters (7045,2\7044 kHz) has only VARA HF +1500Hz 500BW (BPQ+WINLINK)
Without AX\FX.25, IL2P and ARDOP ports. Only VARA HF can get an opportunity to transport information between BBSs in this QRM noise, with the speed rarely 18 bps, but usually faster. In AX\FX.25 my TRX can not decode packets: (
But I am building these days:
1. TX for forwarding by QO-100,
2. PC-TRX interface for my 29 MHz FM station
As alternative way for getting mails, bulls and email via RF.
Therefore, my fwd partners, you can not receive my packets in AX\FX.25 or IL2P.
I don't believe, that my local situation with noise will be better, unfortunately. But I will administrate my BBS and node.
73, Sergey
--
1200 baud it's greater, than zero bits per second :)
Best regards, Sergey Ievkov <RN1M@RN1M.SPB.RUS.EU>
Read previous mail | Read next mail
| |