| |
N9SEO > SYSOP 23.10.25 21:02z 35 Lines 1079 Bytes #180 (0) @ WW
BID : 45298_N9SEO
Subj: Re: How not to get delivered
Path: SR1BSZ<SR8BBS<OK0NBR<OK2PEN<VE2PKT<VE3KPG<VE3CGR<N9SEO
Sent: 251023/2016Z 45298@N9SEO.#NAR.AR.USA.NOAM LinBPQ6.0.25
On Thu, 23 Oct 25 17:31:00 Z
K7EK wrote:
> R:251023/1734Z 42552@WW6Q.#NEIN.IN.USA.NOAM LinBPQ6.0.25
> R:251023/1734Z 23829@WG3K.#SMD.MD.USA.NOAM LinBPQ6.0.24
> R:251023/1734Z 46311@N3HYM.#FRDK.MD.USA.NOAM BPQ6.0.24
> R:251023/1733Z 6258@N3MEL.#EPA.PA.USA.NOAM LinBPQ6.0.24
> R:251023/1731Z 37860@K7EK.#NOKY.KY.USA.NOAM BPQ6.0.25
>
>
> If you are running BPQ32, it's easy to reject messages TO or FROM
> anyone. Look in the Mail Server Configuration under Message Filters.
> You have a broad range of options to Reject or Hold messages using
> TO or FROM or AT or BID fields. This is much better than using
> BADWORD.SYS.
>
These are good suggestions, but they treat the symptoms not the cause.
:D
The cause is an operator has a misconfigured mail client that needs to
be corrected. Becuase I can configure rejects, you can, but the other
99 percentile here probably wont. Heck, we're probably lucky if they
read SYSOP@*. Then user that sent email may wonder some day later why no
one responded. Well because of this. :D
I will now get off my Soapbox. :D
73 Kayne
Read previous mail | Read next mail
| |