OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

SR1BSZ

[Szczecin_PL JO73GK]

 Login: GUEST





  
G8MNY  > TECH     13.11.24 09:50z 57 Lines 2452 Bytes #138 (0) @ WW
BID : 19847_GB7CIP
Read: GUEST
Subj: DEL A870P7 SMPSU 12V 70A
Path: SR1BSZ<IW0QNL<HB9ON<IW8PGT<IZ3LSV<I0OJJ<GB7CIP
Sent: 241113/0949Z @:GB7CIP.#32.GBR.EURO #:19847 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To  : TECH@WW

By G8MNY                              (Correction Jan 21)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)

I bought 2 of these small DEL server SMPSUs at ham car boot sale for 3UKP ea.
(25UKP on web?)

Ideally I needed 75A @ 13.8V for my T500M HF linear. But as a backup PSU these
seem ideal. My older larger DEL 7000815 SMPSU I was able to do 13.8V & that was
very RF quiet.

         < - - - - - - - - 8"- - - - - - - >
         __________________________________           _
Jacking /                                 /³          /| /|\      SPEC
   in  /                                 / ³rear    2.5"
Frame /_________________________________/  ³intake ³/     |    100-240V AC
      ³---------------------------------³  ³fan     ~                870W
  IEC ³                                 ³  ³___           3"  12V Aux @ 1.5A
 MAINS³                                 ³  /  /³               12.1V 70.4A
   Air³                                 ³ /  / /rear      |
  Vent³                                 ³/__/ /connector \ /
      ³_____________________________________³/

Powering up this PSU gives just the power connected green LED. The rear
connector links needed are 1-8 for Fan on (slow), then (0v)3-6 for the +12.1V.
Link Pin 7-24 gives a 0.6V boost to make 12.7V on the main output.

REAR CONNECTOR (my Nos)
  1  5  9 13 17 21  0V   0V    0V   +12V  +12V  +12V
.---------------------------------------------------.
| :  :  :  :  :  : Û Û   Û Û   Û Û   Û Û   Û Û   Û Û|
| :  :  :  :  :  : Û Û   Û Û   Û Û   Û Û   Û Û   Û Û|
'---------------------------------------------------'
  4  8 12 16 20 24 \ _ _ _ _ _ _ 70A _ _ _ _ _ _ _ /

Internally it is uses very small "Surface Mount" components with 2 PCBs &
several daughter boards.

All seems every good, with very few QRM frequencys which are all well down, as
switching is an amaising @ 500kHz on a tiny transformer! Also the mains input
is well filtered & the output is strapped to earth, with the case making a good
"Faraday cage".

DC is better regulated than my float battery system & 30A PSU.

Power consumption with no load & fans on slow it was 26W (45VA).

Also see my Tech buls "DEL 7000815 SMPSU 12V 75A Mods", "Switch Mode PS
Principles", "Clip on QRM Probe", "Mains Plugtop Filter Adapter",
"Reducing Electronic RF QRM", & "T500M 12V 500W HF Linear"

Why don't U sent an interesting Bul?

73 De John, G8MNY @ GB7CIP


Read previous mail | Read next mail


 26.12.2024 01:19:38zGo back Go up