| |
:::::::::::::::::::
:: FLEXNET WRITE ::
:::::::::::::::::::
(only sysop)
WRITE <Flex-File>
Writes a textfile to harddisk. Input can be saved with ^Z or /EX.
<Flex-File> = A, B, C, H, I, L, S
The file will be saved in flexnet directory as e.g. "a.fpr". It's better to
send those files via BCM with WT or WPRG command.
a) The texfiles "a.fpr", "c.fpr", "h.fpr", "i.fpr" and "l.fpr" can contain
any kind of text, there are no rules for these files. But it should be
necessary that every file (not "c.fpr") begins with a carriage return
(CR), so that there output is always shown on a new line.
At the end of each file there should be no CR.
b) The files "b.fpr" and "s.fpr" have a special format, look at
HELP FLEXNET BEACONS and HELP FLEXNET SETSEARCH.
| |