| |
::::::::::::::
:: REMERASE ::
::::::::::::::
(only sysop, init.bcm)
Syntax: REM(ERASE) [<n>]
(default: 1)
The command REMERASE defines if remote erases are possible and how they are
handled. BCM and DPBox can exchange remote erase information. At BCM a remote
erase can be done with "ERASE -F" command.
There are following options:
REMERASE 0 remote erase is disabled
REMERASE 1 remote erase is enabled without any restrictions
REMERASE 2 remote erase is only accepted, if mail was erased
from same BBS where it was created
REMERASE 3 remote erase is only accepted, if mail was erase
from same BBS where it was accepted; mail is only
purged after lifetime elapsed, so sysop has possiblity
to unerase those mails
You can list remote erased mails with "CHECK -R". If you set "REMERASE 3"
and want to really erase those mails you have to do a "unerase <mail>"
and then do a "erase <mail>" again.
| |